Liquid Sample Coolers

  • Designed to reduce high-temperature liquid samples to safe, usable temperatures for analysis
  • 316 Stainless Steel and Copper tubing available
  • Can be disassembled with standard tools for cleaning, or replacement of damaged coils
  • Shell side pressure rating of 150 psi
  • Two Models: Type 1 & Type 2
  • FUNCTION
  • PRODUCT LINE

Madden Liquid Sample Coolers are miniature industrial cooling heat exchangers designed to reduce high-temperature liquid samples to safe, usable temperatures for analysis. They also function as effective coolers for pump seal flush liquid. The counter flow design efficiently cools the tube side liquid.

Sample coolers are available in copper and Type 316 stainless steel tube material. All Madden industrial sample coolers disassemble with standard tools for cleaning or replacement of damaged coils. Carbon steel shell parts are painted with grey acrylic enamel. Shell side pressure rating is 150 psi. Madden Type 2 models may be constructed using a variety of materials to meet a customer’s specific requirements. Contact the factory for a quotation for applications with special material specifications.

Type 1

Sample cooler models have all the piping connections for the sample and the cooling water on the threaded cap on the top of the sample cooler. All coils are 1/4″ OD tubing, and all piping connections are 1/4″ NPT. Cooling water enters on the left and exits opposite on the right. Sample inlet connection is vertical on the top, and the cooled sample exits from the spout.

Type 2

Sample coolers offer both 1/4″ and 3/8″ OD tubing coils. Sample connections are 1/4 NPTF and are made on the top plate. Cooling water connections are 3/8″ NPTF located on both top and bottom plates.

Typically, liquid grab samples can be cooled with 1.3 square foot coil surface area models. for continuous cooling of samples for instrument probes, or for steam.

Types

Note: Coil side pressure ratings are based on maximum temperature of 400 deg F for copper coils and 1,000 deg F for stainless steel coils.

Part No.Max Coil PSIDescription – type, coil surface area, coil material, coil tube sizeWeight
SC0001300Type1, 1.3 sf, copper coil w/ CI head, 1/4″ OD tube15 lbs.
SC0002300Type1, 2.6 sf, copper coil w/ CI head, 1/4″ OD tube25 lbs.
SC00033,000Type1, 1.3 sf, 316 SS coil w/ SS head, 1/4″ OD tube15 lbs.
SC0003A3,000Type1, 1.3 sf, 316 SS coil w/ SS head and SS body, 1/4″ OD tube15 lbs.
SC00043,000Type1, 2.6 sf, 316 SS coil w/ SS head, 1/4″ OD tube25 lbs.
SC0004A3,000Type1, 2.6 sf, 316 SS coil w/ SS head and SS body, 1/4″ OD tube25 lbs.
SC101300Type2, 1.3 sf, copper coil, 1/4″ OD tube25 lbs.
SC1023,850Type2, 1.3 sf, 316 SS coil, 1/4″ OD tube25 lbs.
SC103250Type2, 1.9 sf, copper coil, 3/8 ” OD tube30 bls.
SC1052,500Type2, 1.9 sf, 316 SS coil, 3/8″ OD tube30 lbs.
SC1062,500Type2, 3.8 sf, 316 SS coil, 3/8″ OD tube50 lbs.
SC1074,925Type2, 3.8 sf, 316 SS coil, 3/8″ OD tube50 lbs.
SC1084,925Type2, 1.9 sf 316 SS coil area, 3/8″ OD tube30 lbs.
For Type 2 modes, 1/2″ to 1″ cooling water connections are available upon request.

Note: Type 1 shell side pressure ratings are 300 PSI. Type 2 shell side pressure ratings